Warmup Loose Wire System for Tile and Stone Floors
Warmup UK design their systems using a 2mm, ultra-thin, dual-core heating element. The small cross-section ofΒ the element allows it to be installed in a matter of hours without raising floor levels.
There is no need to dig up the floor or mix concrete. Β Simply fix the heating element to the subfloor, tile straight over and say goodbye to cold feet for good!
We strongly recommend that you use the Insulation Boards with this product, as they can lower your running costs by as much as 50%!
-
- For more information please refer to the Warmup Brochure
- Technical information on the Loose Wire System
Please note:
-
- For areas over the specified sizes, you would need to make up the areas with additional heaters.
| Product Code | N/A |
|---|---|
| Categorised In | Underfloor Heating, Warmup Loose Wire System, Warmup Underfloor Heating |
| Warmup Underfloor Heating |
Warmup Loose Wire DWS System |
| Size |
1 x DWS300 (1.5 β 2.4m2), 1 x DWS400, 1 x DWS600 and 1 x DWS800 (11.5 β 12.9m2), 1 x DWS400, 1 x DWS600 and 2 x DWS800 (17.5 β 18.9m2), 1 x DWS400 (2.5 β 3.4m2), 1 x DWS400 and 1 x DWS600 (6.0 β 6.9m2), 1 x DWS400 and 2 DWS800 (13.0 β 14.4m2), 1 x DWS400 and 3 x DWS800 (19.0 β 20.4m2), 1 x DWS600 (3.5 β 4.4m2), 1 x DWS600 and 1 x DWS800 (8.5 β 9.9m2), 1 x DWS600 and 2 DWS800 (14.5 β 15.9m2), 1 x DWS600 and 3 x DWS800 (20.5 β 21.9m2), 1 x DWS800 (4.5 β 5.9m2), 2 x DWS600 (7.0 β 8.4m2), 3 x DWS800 (16.0 β 17.4m2), 4 x DWS800 (22.0 β 25.0m2), 2 x DWS800 (10.0 β 11.4m2) |





Reviews
There are no reviews yet.